4-way Helium Miner Signal Converter Version 3. To use multiple Miners - All in one.
Splitter - Converter - Amplifier / All in one Module
Brand NEW - Plug and play easy installation between Antenna and Miners
To use 4 Miners on one antenna. This brand new device include everything. No need for extra cables except between your Miners and the 4-way Converter. Automatic attenuation of very strong signals. At minimum -70dB RSSI values between your Miners (range -70dB to -80dB). Convert the strong -15dB or -20dB RSSI values on commercial splitter. No need for extra Divider. Everything in this small device! Incl. Amplifier +12dB for max. performance.
- For all Helium or Crankk Hotspots
- Signal modification/converting up to -85dB
- Natural signals pass through
- No beacon impact
- Everything as usual except strong signals
- For locations in diameter up to 3km (dependent on your settings)
- Build in LNA filter for 868Mhz frequency
- Build in 4-way Splitter
- Build in 12dB Amplifier (to compensate internal port loss and extra boost)
- Incl. 4 x 5dB fix Attenuator
If you use an Splitter/Divider or multiple antennas - be aware:
2/3 or 4-way splitter especially PCB Splitter make reflexion and self witnessing signals. Those signals are very strong and non-natural. It is an clear indication for using multiple Hotspots on the same location. Risk for deny list because auto Algorithmus notice suspect signals.
The 4-way RSM Module V3 (new generation) convert strong signals like -20dB in natural signals up to -85dB (mainly -70db to -80dB). So perfect for a location diameter of approx 2000m. The signals are valid at this perimeter. You could get valid signals for all your Hotspots on a splitter if your location is not too far. All natural signals will be not converted and appears as usual. Its not an generic attenuator or splitter.
No need for additional Amplifier or Splitter. If you will use only 3 Miners you have to close one port with an dummy-load (terminator)
If you have questions please contact us. Resellers are welcome.